:	Mar 2, 2005

.

Disconnect the battery ground cable.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the torque converter flexplate.

.

Install the special tools.   Install the 2 bolts.   Tighten the 2 nuts to retain the special tool.

.

Using the special tool, pierce the seal to create holes for the 6 self-tapping screws.

.

Using the special tools, remove and discard the crankshaft rear oil seal.   Install the 6 self-tapping screws.   Adjust the 2 nuts.   Tighten the center bolt.

.

: Do not lubricate the components. Partially install the crankshaft rear oil seal.   Make sure the components are clean and dry.   Carefully remove the transit sleeve, leaving the seal on the crankshaft.

.

: Make sure the seal is installed parallel Using the special tool, install the crankshaft rear oil seal.   Tighten the special tool nuts evenly and progressively to fully install the seal.

.

Install the torque converter flexplate.